F.R.C-4A耐火母线槽    F.R.C-4A Busbar Duct System 

本产品采用耐高温云母带绝缘材料保证导电母排电气绝缘性能，外壳表面处理采用两层防火涂料进行底喷和面喷，此种防火涂料通过高温火焰幅射后，能生成一层30~50mm厚的泡沫状保护层，对母线槽外围进行保护，起到隔热作用，保证外壳不直接烧坏。从而确保母线槽系统在发生火灾后正常工作。

本产品在正常条件下电气性能完全等同于普通其它型号母线槽，订货参照F.R.C-4A防火母线槽的技术参数和电流等级。安装结构形式与其它母线槽相同，请予参照选型。

This product is adopted the high-temperature resistant mica insulation material to ensure the electric insulation perfor-mance of the electric conductive venter plate.The surface treatmnet of the shell is bottom and surface sprayed with double coatsfire proof paint which can form a spumescence protection coat after the high temperature blaze radiation,to protect the bus ductand indulate heat and to ensure that the shell will not burnt directly,then the bus duct system can work normally atter fire-happens.

Under normal conditions,the electric performance of the product is equal to other ordinary types of bus duct,please placeorder according to the technology parameters and current grade of the F.R.C 4A fire-resistant bus duct.The installation type issame as KFM bus duct,please select accordingly.

型号说明：

技术性能:

      1.本厂生产的F.R.C-4A型耐火绝缘母线槽符合IEC439 -2国际标准,及JB8511- 1996空气绝缘母线槽部颁标准和GBT9978-88建筑构件耐火试验标准的规定。

      2.F.R.C-4A型耐火绝缘母线槽使用额定电压为660V以下，频率为50Hz或60Hz。

      3.F.R.C-4A型耐火绝缘母线槽电能在着火30min内，试验电压为1000V，绝缘电阴在10M n以上，在着火60min时，绝缘电阻在0.5 n,试验电压在1000V以上。

      4.F.R.C-4A型耐火绝缘母线槽采用双排螺栓连接，性能极为稳定，安装方便，外壳防护等级符合IP40所规定的要求。5.耐火试验升温曲线图。

      1.The F.R.C-4A five-resistant insulation bus duct is complied with IEC439-2 International standard,JB8511-1996 air insulationbus duct standard,and with the specification of the T9978-88 buildings structure fire-resistant test standard.2.The rated voltage for this kind of bus ductbelow 660v,frequency:50Hz or 60Hz.

      3.For this bud duct after ignition in 30min,the test voltage is 1000V,insulation resistance is above 10M 0 ,and in 60min theinsulation resistance is 0.5M 0 ,the test voltage is above 1000v.

      4.The bus duct which is connected by double row bolts with stable function and easy installation,the protection grade of theshell is tally with the require-ment of IP40.

      5.The temperature graph of five-resistant:

6.短路容量Short Cirrcuit Capacity:

照明母线系列     Bus Channel For Lighting

      本照明母线槽外壳为挤压成型，具有体积小、强度大、安装方便等优点，适用于各种场所的日光灯、汞灯及其它照明器材的供配电用，规格有: 20A、40A。

      The bus channel have a case of squeezing torming.Advantages Small Vloum,high strength and covenintly ficing,etc.Adapt for power supply and distribution of fluorescent lamp,mercury arc lamp and other lighters anywhere Standards 20A.40A